Sliding Rack Mount
Sliding Rack Mount
Strap Mount
Strap Mount
Adaptive Rack Mount
Adaptive Rack Mount
Fixed Rack Mount Mini
Fixed Rack Mount Mini
Fixed Rack Mount (Pair)
Fixed Rack Mount (Pair)
Adaptive Bar Mount
Adaptive Bar Mount
Fixed Bar Mount
Fixed Bar Mount
Travel Platform
Travel Platform
Rotator Add-on
Rotator Add-on
DIY Dock
DIY Dock
DIY Dock with Base Plate
DIY Dock with Base Plate
Mini Rack
Mini Rack
Lat Extension
Lat Extension
Beyond Power

DIY Dock with Base Plate

$229.00 USD
$229.00 USD
Shipping calculated at checkout.

This item is currently out of stock and is expected to be back in mid-June.

  • Dual Installation Options: Wood panel or concrete wall mounting — the DIY Dock with Base Plate adapts to your space.
  • Precision-Engineered Design: Built from high-grade stainless steel for strength that won't quit.
  • Small Footprint, Unlimited Potential: At just 5.6×3.6×1.7 inches and 2.2 lbs, it delivers maximum versatility.
  • Community-Tested Durability: Built to withstand the creativity of our most ambitious users.

Specs: 

  • Dimensions (L×W×H): 5.6 × 3.6 × 1.7 inches (143 × 92 × 43 mm)
  • Weight: 2.2 lbs (909 g)
  • Material: Premium stainless steel construction
  • Compatibility: Universal VOLTRA I mounting interface

Download

  • AnyMount Series

Build Without Limits

The DIY Dock with Base Plate is your gateway to unlimited mounting possibilities. Whether you're securing your VOLTRA I to a wood panel in your garage gym or anchoring it to a concrete wall in your basement setup, this stainless steel foundation gives you the freedom to train anywhere.

Think Big. Mount Anywhere.

From custom training platforms to wall setups, the DIY Dock with Base Plate turns any solid surface into a VOLTRA I training station.

Dual Installation Options

Wood panel or concrete wall mounting — the DIY Dock with Base Plate adapts to your space.

Small Footprint, Unlimited Potential

At just 5.6×3.6×1.7 inches and 2.2 lbs, it delivers maximum versatility.

Precision-Engineered Design

Built from high-grade stainless steel for strength that won't quit.
Wood panel mounting hardware for DIY Dock with Base Plate
Option 1

Wood Panel Mounting

Mounting surface

Use high-quality plywood with a minimum thickness of 1-5/8 in (40 mm).

Hardware needed

  • 5/16 × 1-3/8 in or M8 × 35 mm hex socket cap head self-tapping screws
  • Flat washers with an outer diameter less than 0.79 in (20 mm)

Tools needed

  • 1/4 in or 6 mm drill bit
  • 1/4 in or 6 mm hex bit
  • Electric drill

Search keywords

5/16 x 1-3/8 hex socket self-tapping screw 5/16 x 1-3/8 socket head self-tapping screw M8 x 35 hex socket self-tapping screw M8 x 35 stainless steel self-tapping screw flat washer outer diameter under 20 mm
Concrete wall mounting hardware for DIY Dock with Base Plate
Option 2

Concrete Wall Mounting

Mounting surface

The concrete wall must be solid, non-hollow, and load-bearing, with a minimum thickness of 4 in (100 mm).

Hardware needed

  • 5/16 × 3 in or M8 × 80 mm stainless steel wedge anchors
  • Flat washers with an outer diameter less than 0.79 in (20 mm)
  • Hex nuts

Tools needed

  • 3/8 in or 10 mm drill bit
  • Electric drill
  • Ratchet wrench
  • Anchoring adhesive and applicator gun

Search keywords

5/16 x 3 stainless steel wedge anchor 5/16 x 3 concrete wedge anchor M8 x 80 stainless steel wedge anchor M8 x 80 concrete wedge anchor flat washer outer diameter under 20 mm
Where to buy

Where to Search for Mounting Hardware

You can search for the required screws, wedge anchors, washers, and nuts at Amazon, McMaster-Carr, Fastenal, Grainger, Home Depot, Lowe’s, or Ace Hardware.

Availability may vary by retailer and location. Before purchasing, please confirm the screw length, anchor size, and washer outer diameter.

!

Important

Washers must have an outer diameter less than 0.79 in (20 mm). Oversized washers may NOT fit inside the recessed openings. Do NOT install into drywall, hollow walls, brick veneer, weak surfaces, or non-load-bearing structures.

Disclaimer

The Beyond Power DIY Dock with Base Plate is for customers seeking customization at their own risk. Use with caution—always follow instructions and ensure any third-party components are reliable, as these decisions are solely your responsibility. Beyond Power is not liable for any damage, injury, or issues resulting from the DIY Dock with Base Plate or non-Beyond Power mounts. By using this product, you accept all associated risks.

Ready to build your custom setup?

Share your installation on r/BeyondPower and inspire the community.
Share Now

  • Name for your product

    $229.00 USD
    $229.00 USD

  • Name for your product

    $229.00 USD
    $229.00 USD

  • Name for your product

    $229.00 USD
    $229.00 USD

  • Name for your product

    $229.00 USD
    $229.00 USD

  • Name for your product

    $229.00 USD
    $229.00 USD

  • Name for your product

    $229.00 USD
    $229.00 USD

You May Also Like

Explore our complete range of innovative products and accessories.